Description

Optimum Hyper Spray Compound

Optimum Hyper Compound is the first and only spray compound in the marketplace that can remove 1,000 grit and deep scratches in seconds while creating an excellent finish. Optimum Hyper Compound was designed for professional detailers and auto body shops to cut through wet sanding marks and deep scratches in one or two passes. Optimum Hyper Compound offers all the advantages of Optimum line of polishes with long working time and low to no dusting.

The spray-on application provides ease of use and reduces the amount of product needed to a fraction of the traditional products. 2-3 sprays are enough to cover the entire pad making the whole pad do the cutting and eliminating dry buffing. The minor swirls left after using Optimum Hyper Compound can easily be removed with the Optimum Hyper Polish. Optimum Hyper Compound has a long working time to allow complete paint correction with one application. The residue can be easily wiped off with a dry or damp microfiber towel.

Optimum Hyper Compound contains no silicone oils or wax, so it is ultimately body shop safe.

Optimum Hyper Compound can be used at any speed on your Polisher with a wool or foam pad.

When using a wool buffing pad, the compound will remove 1000 grit sand scratches.

Dual Action Polisher at a speed of 3-4 or a rotary buffer at 1200-1400 RPM.

Faster buffing speed is not needed with this product. When using a medium or heavy cut foam pad, the compound will remove 2,000 sand scratches and lighter with your DA Polisher at a speed of 3-4 or a rotary buffer at 1200-1400 RPM.

The compound works more or less aggressively, depending on the pad you choose.

Directions:

• To remove 1,000 grit or finer sanding marks, spray Optimum Hyper Compound on the Optimum HyperWool Foam Pad using Polisher at a speed of 3-4 or a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Hyper Compound on a foam pad using Polisher at a speed of 3-4 or a rotary buffer at 1200-1400 RPM.
• Shake Well.
• Use 2-3 sprays initially to prime the pad. After the initial priming, use two sprays per panel.
• There is no need to apply additional products since Optimum Hyper Compound has a long working time and will continue on working to remove the scratches.
• Use light to medium pressure on the buffer until desired results are achieved.
• For final polishing use the Optimum Hyper Spray Polish with a foam pad. For lighter cutting and a deeper gloss, use with less aggressive pads or an orbital buffer. VOC compliant and body shop safe.