Description
CHOOSE SIZE CAREFULLY
MINIMUM ENTRY DIAMETER OF 25 MM BAR IS 33 MM
Internal Grooving bar has different sizes this is suitable to TDC,TDT,TDJ,TDX
Suitable to Taegutec Tip
Steps to choose size.
1.Entry Diameter of the component and bar entry dia should be less than component entry dia
2. width inside you need for this if you need a 2 mm groove width you should choose 2 mm of grooving insert and if you have width of 3.5 mm you can do with both 2 mm and 3 mm of insert so choose 2 mm or 3 mm
3. Right hand or left hand as per machine or as your requirement
