Description
-
Normal type blades cannot rotate 360 deg
Center head: To locate center of cylinder with diameter (d): 30 – 100mm Accuracy: 0.15mm
Protractor head: To set the blade at desired angle to an edge of a workpiece, and can be used to measure angles Range: 0-180 Accuracy: 7min.
Square head: To set the blade at 90 or 45 to an edge of a workpiece Accuracy: 8min for 90 square, 10min for 45 square
Blade: Range: 300mm/12″, Graduation: 0.5mm and 1/32″ on front face, 1mm and1/64″ on back face Optional accessory: rigid rule
MHC 638-7754 Combination Set 300mm/12″, Centre head, Protractor and 12″ rule, Graduation: 0.5mm and 1/32″ on front face, 1mm and 1/64″ on back face, Normal type blades cannot rotate 360 deg
