Steinmeyer Dial Snap Gauge 75-100mm 76390100520

Description

Steinmeyer Dial Passameter 3901

Passameters are adjustable snap gauges which are mostly used for measuring and testing of round-cut and milled parts. They replace a large number of fixed gauges whilst this device also has the advantage of a number display if there are deviations to the preset value. The Passameter 3901 requires no additional display device and can be used immediately.

Gageblocks, gages, or a selected test piece is used to set the instrument to the nominal size. For this purpose, turn the adjusting nut to move the adjusting bolt in the axial direction, until the pointer approximates zero. Tighten the clamping nut to prevent an unintentional displacement.

The exact zero adjustment is made by turning the knurled knob on the rear panel. The dial adjustment can be fixed by means of the set screw.

View Product Data Sheet

Description

• Standard: DIN 863 | DAkkS-Kalibriert nach DIN EN ISO/IEC 17025:2018
• Measuring range: 0 – 200 mm (depending on version)
• Resolution: optionally 1 m (< 0.001 mm) or 2 m (< 0.002 mm)
• Display: Precision pointer indicator (adjustable) with measured value pre-setting and adjustable tolerance marks
• Optional: customer-specific configuration on request

Application

• Thickness and length measurement of rotationally symmetrical parts
• fast and simple serial testing by pre-setting measuring values and adjustable tolerance marks
• suitable for use in measuring rooms or close to production

All images are for representation only.

Technical Data

Article Passameter 3901 Version Graduation 1 m Graduation 2 m Standard DIN 863 DIN 863 IP protection class Splash-proof measuring mechanism for safe measurement on the machine Measurement analog analog Product type Passameter, adjustable dial indicator, precision pointer micrometer, precision pointer dial indicator Resolution / Display Precision indicator 1 m (0,001 mm) 2 m (0,002 mm) Flatness (measuring surfaces) 0,3 m (< 0,0003 mm) 0,3 m (< 0,0003 mm) Parallelism (measuring surfaces) 1 m ( 0,001 mm) 1 m ( 0,001 mm) Diameter (measuring surfaces) 10 mm 10 mm Measuring stroke of the sensor 2,5 mm 2,5 mm Measuring force generation spring spring Measuring force standard 5 – 10 N 5 – 10 N Display precision pointer precision pointer Precision pointer display range 70 m ( 0,007 mm) 140 m ( 0,0014 mm) Precision pointer scale division size 0,8 mm 0,8 mm Precision pointer dial adjustment 8 m ( 0,008 mm) 15 m ( 0,0015 mm) Anvil adjustable adjustable Adjusting bolt adjustment range 25 mm 25 mm Versions / Application range 0 – 100 mm 0 – 200 mm Measuring surfaces made of CBN on request on request Packing stable box stable box Weight (Version 0 – 200 mm) 0,8 – 1,3 kg 0,8 – 1,9 kg