Description
Sweetwater brandfine-porediffusers are the same high-quality diffusers as the regular Sweetwater diffusers. The only differences in the smaller pore size which produce finer bubbles. Sweetwater fine-pore diffusers do require higher pressure (about 5 H2O more) and more frequent cleaning so they are not recommended for regular aeration. The bubble uniformity is excellent.
| Body: |
2000F Heat Bonded Silica |
| Fitting: |
ABS or Linear Polyethylene |
| Maximum Pore Size: |
80 microns |
| Bubble Size: |
0.5-2 mm |
| Nominal Particle Retention: |
25 microns |
| Service Life at pH Below 8.0: |
Unlimited |
| Flexural Strength: |
3500 psi |
| Code |
Length
(Inches) |
Width
(Inches) |
Suggested
CFM |
Air Supply
Connection |
Actual
Weight |
| AS10 |
1.5 |
0.5 |
.05 |
3/16 OD, ABS |
0.3 lbs |
| AS20 |
1.5 |
0.75 |
.10 |
3/16 OD, ABS |
0.6 lbs |
| AS3F |
2.0 |
1.0 |
.20 |
3/16 OD, PE |
0.10 lbs |
| AS40 |
1.5 |
1.5 |
.25 |
3/16 OD, PE |
0.21 lbs |
| AS80 |
3.0 |
1.5 |
.35 |
1/4 OD, PE |
0.39 lbs |
| AS150 |
6.0 |
1.5 |
.50 |
1/4 OD, PE |
0.75 lbs |
| AS230 |
9.0 |
1.5 |
.75 |
1/4 OD, PE |
1.35 lbs |
| ALR230CP |
9.0 |
1.5 |
.75 |
1/2 OD, CPVC |
1.35 lbs |
| AS300 |
12.0 |
1.5 |
1.00 |
1/4 OD, PE |
1.50 lbs |
| ALR300CP |
12.0 |
1.5 |
1.00 |
1/2 OD, CPVC |
1.50 lbs |
