Description
FM-S10SW FM Series 10″ 400W Flush Mount Marine Subwoofer – Square Grill – White
Clear audio, clean aesthetics, all-class.
Engineered for high-quality audio reproduction with innovative design aesthetics, Fusion’s FM Series flush mount marine subwoofers are designed to deliver high-quality bass to your vessel in a sleek and minimalistic form factor to meet the latest boat design trends.
Featuring an intelligent mounting system for non-intrusive, easy installation, the FM Series subwoofers are designed to be flush mounted with a mounting flange no thicker than 3mm [1/8″] for a premium, visually-appealing, near-flat finish.
With an IP65 weatherproof rating, True-Marine accreditation and an industry-leading 3-year warranty, you can enjoy peace of mind that your FM Series subwoofers are built to last on board season after season.
Features:
- Optimized 2.1 Configuration: When connected with a pair of FM Series speakers and a Fusion Multi-Zone stereo with DSP, you have the option of creating a 2.1 audio zone to simplify installation and reduce system cost by adding bass without the need for an external amplifier.
- Quality Audio Reproduction:Enjoy quality low frequency audio at any volume level.
- Innovative Design Aesthetics:Designed with a low profile, near-flat installation for a visually appealing finish, the FM Series will complement the aesthetics of any vessel.
- Non-Intrusive Mounting System:The FM Series uses ‘speaker legs’ that keep the subwoofer in place without creating any screw holes to your vessel.
- True-MarineDesigned and Engineered:Extensively tested to perform in the harsh marine environment, the FM Series carry an IP65 weatherproof rating along with True-Marine accreditation.
- Designed To Comply With ISO12216: Tested to international standards for pressure and watertightness, it recognizes the FM Series are designed and built to the highest industry standards for quality and robustness.
Specifications:
- Subwoofer Size: 10″
- Peak Power: 400W
- RMS Power Rating: 120W
- Efficiency (1W/1M): 87 dB
- Frequency Response: 30 Hz – 2 kHz
- Nominal Impedance: 4 Ohms
- Recommended Amplifier Power (RMS): 40-300 W/Ch
- Cone/Surround Material: Polypropylene with rubber surround
- Mounting Diameter Clearance: 269mm x 269mm (10-9/16″ x 10-9/16″)
- Mounting Depth Clearance: 140mm (5-1/2″)
- Optimum Enclosure Volume (Sealed enclosure, fully filled with absorption material): 40L
- Operating Temperature Range: 0-50C (32-122F)
- Storage Temperature Range: -20-70C (-4-158F)
- Water and Dust Resistance (IPX rating): IP65
- Warranty: 3 Years

Specifications:
- Cutout Size: 10.59″ x 10.59″
- Mounting Style: Flush
- QTY: Single
- Size: 10″
- Box Dimensions: 7″H x 13″W x 13″L WT: 9.45 lbs
- UPC: 753759236724
Brochure (pdf)
![KICKER CompRT 6.75 Ultra Thin Subwoofer – 4-Ohm [48CWRT674]](https://www.micrometerx.com/wp-content/uploads/2025/8/1756623380/kicker-comprt-6-75-ultra-thin-subwoofer-4-ohm-48cwrt674.webp)
![KICKER L7S 8 Square Subwoofer – 4-Ohm, 450W [44L7S84]](https://www.micrometerx.com/wp-content/uploads/2025/8/1756623380/kicker-l7s-8-square-subwoofer-4-ohm-450w-44l7s84.webp)
![KICKER CompRT 10 Ultra Thin Subwoofer – 2-Ohm [48CWRT102]](https://www.micrometerx.com/wp-content/uploads/2025/8/1756623380/kicker-comprt-10-ultra-thin-subwoofer-2-ohm-48cwrt102.webp)
![KICKER L7S 10 Square Subwoofer – 2-Ohm, 600W [44L7S102]](https://www.micrometerx.com/wp-content/uploads/2025/8/1756623380/kicker-l7s-10-square-subwoofer-2-ohm-600w-44l7s102.webp)
![PENN Fierce IV 6000 Spinning Reel FRCIV6000 [1558712]](https://www.micrometerx.com/wp-content/uploads/2025/8/1756623230/penn-fierce-iv-6000-spinning-reel-frciv6000-1558712.webp)
![PENN Fierce IV 8000 Spinning Reel FRCIV8000 [1558714]](https://www.micrometerx.com/wp-content/uploads/2025/8/1756623230/penn-fierce-iv-8000-spinning-reel-frciv8000-1558714.webp)
![PENN FTHII20LWLH Fathom II Level Wind 20 Left Hand Reel [1481308]](https://www.micrometerx.com/wp-content/uploads/2025/8/1756623190/penn-fthii20lwlh-fathom-ii-level-wind-20-left-hand-reel-1481308.webp)
