Description
This is a multifunction standard indicator that is reliable and easy to use.
- Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible.
- The ABSOLUTE sensor means you dont have to carry out origin setting every time you power it on, saving you time and hassle.
- Excellent visibility with a large digital/analog display.
- Model with 0,5 m digital step is available.
- Measurements such as simple calculation and peak detection are possible.
- Equipped with a calibration schedule warning function.
- GO/NG judgement is performed by setting the upper and lower tolerances.
- Display 330 rotatable.
- A function lock protects the display against unauthorised use.
Model -ID-C1012ENX
Digital/Analog -Digital
Inch-Metric -Inch/Metric
Delivered -Including CR2032 battery, battery lid opener, certificate of inspection
Range -0.5″/12.7 mm
Digital step -0.0005″/0.01 mm
Max. Permissible ErrorE MPE (Total Range) -0.001″/0.02 mm
H MPE (Hysteresis) -0.001″/0.02 mm
R MPE (Repeatability) -0.0005″/0.01 mm
Measuring force MPL -0.9 N
Protection -IP42
Type -ASME/ANSI/AGD Standard
Mass -190 g
Display -LCD, character height 11 mm, 330 rotatable
Max. response speed -Unlimited
Measurement frequency (MAX/MIN/RANGE) -50 times/s
Alarm -Low voltage, setting errors, sensor error, display overflow a.s.o.
Stem -9.52 mm
Contact point -Carbide ball, thread: No.4-48UNF
Power supply -1 battery CR2032
Battery life -Approx. 2700 hours (continuous use)
Digital Scale -Electrostatic capacitance type absolute linear encoder
ON/OFF -Yes
ABS / INC (INC ZERO) -Yes
Function lock -Yes
GO/NG judgement -Yes
DATA/HOLD -Yes
Auto Power OFF setting -Yes
Counting direction switchable -Yes
Customizing keys -Yes
Calibration warning function -Yes
Low voltage alarm -Yes
Digital step switchable -No
Digimatic data output -Yes
Digimatic S1 Bidirectional interface -Yes
Analog bar resolution switchable -Yes
Inch/Metric switchable -Yes
