Description
PDF Brochure
Diavite Tracer KKH with skid, concave/vex surface, 4 mm, 5 m/90 for VH/VHF, Article code: KKH-04/10/90/5
- tracer for concave and convex parts with a minimum radius of 5 mm
- irregular curvatures can also be measured
- the minimum lt and lc must be applied
- radius of the tip: standard 5 m
- radius of skid: r = 1 mm
- do not use with the advance device down
- the use of a stand for the advance device is strongly advised
![Mitutoyo 178-561-12E Surftest SJ-210 Surface Roughness Tester [inch/mm] R5m; 4Nm Range 16mm](https://www.micrometerx.com/wp-content/uploads/2025/8/1756621184/mitutoyo-178-561-12e-surftest-sj-210-surface-roughness-tester-inch-mm-r5m-4nm-range-16mm.webp)
![Surftest SJ-210R [mm] R2m; 0,75mN; Retract-Drive 178-562-11D](https://www.micrometerx.com/wp-content/uploads/2025/8/1756621134/surftest-sj-210r-mm-r2m-0-75mn-retract-drive-178-562-11d.webp)

![Mitutoyo Roughness specimen Ra 0,4/Ra3m[inch/mm] 178-607](https://www.micrometerx.com/wp-content/uploads/2025/8/1756621047/mitutoyo-roughness-specimen-ra-0-4-ra3m-inch-mm-178-607.webp)