Description
PDF Brochure
- only for use with VHF feed system
- maximum depths of grooves: 25 mm
- groove width min: 1.5 mm
- radius of the tip: standard 5 m
- also available with 2 m diamond
- do not use with the advance device down
- the use of a stand for the advance device is necessary
-
Model nivelSWISS 50-W Detector Conical taper angle 90 Stylus tip radius 5m Additional Details Skid=No| Measuring Depth=25mm| Minimum Slot Width=1.5mm|
![Mitutoyo 178-563-11E Surftest SJ-210 Surface Ronch/mm] R2m; .75mN Range Roughness Tester, 16mm Retractable Type](https://www.micrometerx.com/wp-content/uploads/2025/8/1756621184/mitutoyo-178-563-11e-surftest-sj-210-surface-ronch-mm-r2m-75mn-range-roughness-tester-16mm-retractable-type.webp)
![Height gauge adaptor [inch] for Surftest SJ-210 / SJ-310 12AAA233](https://www.micrometerx.com/wp-content/uploads/2025/8/1756621035/height-gauge-adaptor-inch-for-surftest-sj-210-sj-310-12aaa233.webp)
![Mitutoyo 178-561-12E Surftest SJ-210 Surface Roughness Tester [inch/mm] R5m; 4Nm Range 16mm](https://www.micrometerx.com/wp-content/uploads/2025/8/1756621184/mitutoyo-178-561-12e-surftest-sj-210-surface-roughness-tester-inch-mm-r5m-4nm-range-16mm.webp)